Replies to This Discussion

Permalink Reply by leslie tennant on June 27, 2013 at 12:09pm

just wanting to know if there is updates on this well pad i own property that butt's up beside it a 54 acre lot and 70 acre lot

Permalink Reply by Bob Donaghy on June 27, 2013 at 12:43pm

Three permits have been issued for the Stewart well 095-02087, 095-02088, 095-02089

Attachments:

• Stewart well.jpg, 66 KB

Permalink Reply by leslie tennant on July 1, 2013 at 9:07am

i talk to jason beal at one of magunum hunter's office and he told me, that my 54 acres is in the unit and none of my 70 acres is, but the landman told me the 70 acres is.  here is jason's phone number  1-704-760-0553 he is handling tyler county for magnum hunter or triad hunter. he also said they where in process of making road wider and starting the well pad. if any one close has any questions if there in the unit refer to jason.

Permalink Reply by Bob Donaghy on July 1, 2013 at 9:42am

You should be able to get a copy of the unit map for the Stewart well in the Tyler County Courthouse. It will list the names and acreage of all the mineral owners in the unit.

Permalink Reply by leslie tennant on July 6, 2013 at 7:02pm

after they finish putting unit together, how long does it take to file in court house. i live here in brooke county and the number i posted is 1-740-760-0553 for magnum hunter (triad hunter) office

Permalink Reply by leslie tennant on July 30, 2013 at 9:04pm

hi bob, i got a question for you. the picture of the map with the steart well pad off to the left side alot of yellow pins is there a chance of a future well pad on the yellow pin areas.

Permalink Reply by Bob Donaghy on July 30, 2013 at 9:30pm

I believe those are all permitted as Triad Hunter vertical wells, none of the pins represent a horizontal well.

Permalink Reply by leslie tennant on July 30, 2013 at 9:35pm

thank you i own a 70 acre track 1 mile off rte 18 on hickman run road it crosses both sides of road.

Permalink Reply by Bob Donaghy on July 30, 2013 at 10:04pm

There are 3 permitted Stewart wells. The western most well will extend to Hickman Run about 1.1 miles from Rt 18.

Permalink Reply by Bob Donaghy on December 17, 2013 at 10:01pm

Is this the first Utica well permit issued in Tyler County?

Permit #47-9502128 was issued on 12/12/2013 to Triad Hunter for the well pad on the Stewart farm in western Tyler County. It is to be a horizontal well drilled in the Point Pleasant shale which is part of the Utica shale. When this well is drilled it should answer many of our questions about the Utica in Tyler County.

Permalink Reply by leslie tennant on August 27, 2013 at 2:23pm

hi bob, just wandering if you heard anything on the well pad at the steart farm if it is in or if they started drilling. thanks for any imfo and your time

Permalink Reply by Bob Donaghy on August 28, 2013 at 12:57pm

Don't know anything more about the Stewart well. Antero has applied for a permit for the Pursley well that will be located NNW of Hickman Run and could easily extend to the Hickman Run area.

• ‹ Previous
• 1
• 2
• Next ›
• Page