drilling time

How long does it take to drill a well if utica with 3 so far lateral. Also is there a reason that they put a well on the belmont county engineers list rather than list it on the regular list with the other lists?

Views: 639

▶ Reply to This

Replies to This Discussion

Permalink Reply by evan on April 10, 2014 at 12:17am
Not sure exactly what your asking but it took Chesapeake 12 days to drill one 5400 ft lateral on my neighbors.
Permalink Reply by catt on April 10, 2014 at 12:56am

Usually the proposed wells  show up on the engineer's list first, then a permit is issued and then they go on the permit list.......

Permalink Reply by Mark Y on April 10, 2014 at 3:22am

They have been drilling on this well for about 2 weeks does it go on the permit list after production.

Permalink Reply by Bill Barnaby on April 10, 2014 at 2:08am

20 days~ roughly (I see one guy had one drilled in 12).

Permalink Reply by Jim Litwinowicz on April 10, 2014 at 2:40am

It may take 15-20 days to drill a well.  If they take a lot of core samples it could be longer.  But the drilling is just one part of the process. They have to do a lot of other things and the total time will be several months.  Start to finish, including a new pad and road, could be 6 - 12 months.

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service