Gulfport Drilling and fracking in Warren Tnsp

Hello,

Could you someone please let me know what might be going on with Gulfport drilling in Warren Township. Think they were drilling the Angelo pad and may have even fracked it.  We Have some acres in these units and have trouble getting info. Any helps would be greatly appreciated.

Thanks

Mike Digity

Views: 1208

▶ Reply to This

Replies to This Discussion

Permalink Reply by Becky Moore on July 8, 2021 at 2:26am

Mike - looks like 5 laterals going north are being drilled and 1 lateral going south is permitted. 

Permalink Reply by John M Digity on July 9, 2021 at 12:54am
Becky,
Thanks for the info. Sometimes it's hard to get.
Mike Digity
Permalink Reply by Becky Moore on July 9, 2021 at 1:34am

Trying to navigate the data can be challenging. I work for CX-Energy in Pennsylvania. I wish PA had a site with all the bells like Ohio https://gis.ohiodnr.gov/MapViewer/?config=oilgaswells 

Permalink Reply by John M Digity on July 9, 2021 at 3:47am

Yea but this is still hard enough to get info from. Would have thought that oil company would have contacted landowners to let them know when drilling etc would be taking place but that's just how I would do things. I guess at some point a check may show up or not. lol

M Digity

Permalink Reply by martin on August 17, 2021 at 8:00am

I was told by a guy the works for Gulfport that they plan to be in production sometime in Oct. Your first royalty check should arrive 3 months after. I would expect check late December early January. Of course baring any unforeseen problems.

Permalink Reply by John M Digity on August 18, 2021 at 12:17am

Thanks Martin,

Appreciate the info. Did manage a road trip last week up to the well site. Lots of sand boxes sitting and truck traffic in and out but couldn't get too close. One person we did talk with told us about the same as you Martin.

Mike

Permalink Reply by martin on August 19, 2021 at 2:53am

gulf%20port%20investors%20slide.pdf

Angelo pad is mentioned in the presentation 

Permalink Reply by John M Digity on August 23, 2021 at 11:31pm

Hi,

Does anybody know if the Angelo pad is now considered held by production.

M Digity

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service