Help with Reconciling gas statement

I put all info from my statements  on a spread sheet, match the production numbers with those from the P.A production web page and they don't match. Should they match and if so What should I do? Any help maybe I'm not doing it correctly.

Views: 362

▶ Reply to This

Replies to This Discussion

Permalink Reply by Tom R on April 28, 2014 at 8:52am

I can't offer any sage advice since I'm seeing the same thing. When I compare the numbers, the ones reported on my statements come out about 10% less than the figures on the PA website. Hope someone more informed will provide some input!

Permalink Reply by Philip Thackray on April 28, 2014 at 11:00am

Hi all,

I'm wet Marcellus XTO Forward Township, Southern Butler County, PA.  My check stub residual gas total is about 11% less than the "Mcf" reported by PA DEP for Marburger Dairy B 1H.  The PA DEP number could be the total well head Mcf (C1-4).  The check stub Mcf could be the residual gas (C1-2) minus the NGLs (C3-4).  Eleven percent shrinkage may be right for the BTU content of this well.  I'm just not sure about that.

Phil

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service