I put all info from my statements  on a spread sheet, match the production numbers with those from the P.A production web page and they don't match. Should they match and if so What should I do? Any help maybe I'm not doing it correctly.

Views: 362

Reply to This

Replies to This Discussion

I can't offer any sage advice since I'm seeing the same thing. When I compare the numbers, the ones reported on my statements come out about 10% less than the figures on the PA website. Hope someone more informed will provide some input!

Hi all,

I'm wet Marcellus XTO Forward Township, Southern Butler County, PA.  My check stub residual gas total is about 11% less than the "Mcf" reported by PA DEP for Marburger Dairy B 1H.  The PA DEP number could be the total well head Mcf (C1-4).  The check stub Mcf could be the residual gas (C1-2) minus the NGLs (C3-4).  Eleven percent shrinkage may be right for the BTU content of this well.  I'm just not sure about that.

Phil

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service