EQT is busy tearing up Crane run Rd. off Rt. 146  hauling truck after truck after truck of water to their well off red lane rd. Dont know if they are fracking or getting ready to,or just drilling. Cant see the wellpad from any rd. They are also setting up on Cubbison rd, not far west from Northstar rd.. That drill pad is very close to the rd. And not far from a couple houses. Both wells are on ODNR's website. Small acreage drilling units.  Anyone got more info?

Views: 27891

Replies to This Discussion

booger1  I'll check out the Kamm well ,later

Thanks, i just cant do the ODNR...

Hi Mike,

The new DNR interactive site is a big improvement over the old site but you need a high speed internet connection. It is here.. http://www2.dnr.state.oh.us/website/dog/oilgasviewer/index.html

The property layers for Guernsey are a mess as nobody has taken the time to do it correctly but.. you get the picture. I've found I don't need to change much of anything to view wells. Just click ok on the disclaimer and then close the layers box and zoom into where you want. Turn on the basemap you want. Click on the "Info" tool at the top and click on a property or a well head for more "Info". Attached is the plat for the Clark well off Cubbison.

Hope that helps..

Attachments:

HI Steve... thanks , i will check it out... but hope ole bo will post the Kamm site...:)

 

Mike

Cant find a "Kamm " site. Is it listed with another name,or where is it?

It will be listed as Kamm wellsite...

.i think they havnt gottne the permit yet...

.is why it cant be found...

I have a EQT layout map of all 8 well sites....

Clark will have 3 going North west to 313...

Kamm and Dobeck EACH will have 3 going NW and 3 going SE

Most all pads will either be 3 lines run or SIX...!

EQT says they will move to Kamms site after Clark is done..

Eventually there will be 8 pad locations with up to

 

24 + lines run....by lines... i mean FRACTURED lines....

and Cubbison is due to be PAVED...oh woe is us...:)

 

 

Mike... The EQT Clark well bores under Kamm Rd but as others here have said, I don't see any other well permit in the area. The plat I attached shows the bore going all the way up to SR 313. I think they have filed for another lateral but I don't see a permit map yet...

Thats possible they havnt got the permit yet...

Thanks for looking tho...

I couldnt even find how to print out or find Clark...

 

but we do know they are going to Kamms/Kastelic site next

Well pad will be at the lower left of Kamms and Right lower of Charlie kastellic..

Somewhere is the blueprint tho for the Kamm Permit...

There will be six holes on Kamms.....well...3 on Kamm property and 3 on  Charlie Kastelic

Clark will have 3 holes....30 foot apart...

 

Kamm and Doebeck both will have 6 holes each...

Also a pad will go in at Tysingers property...

We have a EQT map of all 8 sites....side by side....

Outlined....not a blueprint...

Gonna be a long  noisy summer...

a 8 million gallon water hole is built on clarks and one will be built RIGHT ALONG SIDE Cubbison at Lyman Kastelics...

 

I wonder how long till BLUEGILLS ... appear in those ponds..:)

 

 

 

 

 

Is your map of EQT 's 8 well sites something you can share?

Mike... Sounds like you have more info than us.. :)

I can try and run it thru my printer and put it on a pic file and email it...to anyone...

i would need a regular email...

Mine is .. offy@windstream.net

 

 

 

I will make a pic file of it....hard to read the names on each site tho...

but gives a real accurate look of where the sites will be...

Anyone that wants a copy i need your REAL email...

Mine is.... offy@windstream.net

 

Mike

 

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service