Fox Township of Carroll County

I just learned that I have a few acres included in a Beadnell unit situated in Fox Township. Can anyone on this site share any information with me: has the well or other wells in this unit been drilled or fracked? Thanks...

Views: 1591

▶ Reply to This

Replies to This Discussion

Permalink Reply by CARROLLCOUNTYACE on September 15, 2013 at 7:39am

http://www.dnr.state.oh.us/mineral/oil/MRMImages/17/2/234326.pdf

Is your land inside the black dash lines when you open the link ? That is a Plat map it shows the production unit. BEADNELL A 21-13-4 Acres 177.77 Well No. 8H

Interesting there is another set of wells with the name BEADNELL in Fox

http://www.dnr.state.oh.us/mineral/oil/MRMIMAGES/17/2/243906.pdf

Permalink Reply by CARROLLCOUNTYACE on September 15, 2013 at 7:57am

BEADNELL A 21-13-4 Acres 179.22 Well No. 3H

Permalink Reply by Mark McGrail on September 15, 2013 at 1:12pm

CarrollCountyAce,

The ODNR web site is great

Permalink Reply by hunter4440 on September 16, 2013 at 2:52am

Carrollcountyace...I believe that the unit is correct. I assumed that the actual unit will be considerablly larger. Has the drilling pad been built or the well drilled. Thanks

Permalink Reply by CARROLLCOUNTYACE on September 16, 2013 at 5:40am

Hi Hunter4440,  The 8h is Drilling The 3h has not been drilled yet.  I am part of a unit where someone in there contract limited the size of the unit to 160 acres or less but normally they are 500 - 640 acres.

Permalink Reply by Denver Gallentine on September 16, 2013 at 7:46am
Hunter4440,
Hi, I have not spoken to you for awhile. Hope all has been going well. Have you heard anything about the land in Rosé Township around the Ramsey PU? - Denver
Permalink Reply by jnm on September 15, 2013 at 1:01pm

The actual unit that pays royalties will be a lot bigger than 177 acres. The acres on the permit application are always different than when the actual production unit is established

015334grltd9mPermalink Reply by 015334grltd9m on September 15, 2013 at 2:01pm

explain?

Permalink Reply by Denver Gallentine on September 16, 2013 at 8:47am
Fang,
Thanks for the information. I assumed they set up the pooling unit prior to beginning to drill. I know I have signed for pooling units size. If I understand what you are saying, that PU size can change after drilling begins. - Denver
015334grltd9mPermalink Reply by 015334grltd9m on September 16, 2013 at 8:32am
As long as they add more laterals. Why didn't they start out with 600 acres in the beginning?

RSS

© 2025   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service