Tags:
Read the comments on this in the discussion. Sesmic data is usually not available to the general
public.
Homer or anyone else that knows,
how accurate are those maps people are commenting on that show the lines for oil, wet, and dry gas? Can an area contain - just dry gas - or can it be a combination of oil, dry and wet? and if it is combo, where can people find information that shows the distribution? Finally - tell me what is under northwest butler county - seems like someone is doing a great deal of Seismic testing there? (along west park road and 108) thanks again
Lara,
I sent you a request to be my friend on here. Most all your questions are answered in some of my previous threads
Lara,
not sure what maps you're referring to, but generally, wells in the NE of PA are dry gas, wells in the SW corner are wet and along the OH/PA border and into OH it appears to be more gas and oil (though there isn't a whole lot of public data on that in regards to the Utica)
As far as Butler Co goes according to PADEP it looks like it's so far around 2/3-3/4 dry gas and the remaining returning some condensates in varying amounts.
To get a more detailed look go to https://www.paoilandgasreporting.state.pa.us/publicreports/Modules/...
and look at the production reports for the wells closest to you. You can get an idea this way but, truth be told, even the gas co's can't be sure of what's down there until it's drilled.
Lara,
really hard to say. 10 miles north of me are some of the best wells in the state.
10 miles west and they get good production. 10 miles south and it's questionable, same for east. But then, Wyoming Co. appears to be sitting on the' Line of Death' and it's gonna take more drilling to really find the edges.
That said, it's really hard to say. I've seen wells with average production 3 miles from state record holders. A lot depends on lateral lengths and just how the well is completed. There is still some experimenting with completions going on to determine the best way to maximize production, so it's kind of hard to do real comparisons. The public data doesn't tell how long laterals are, frac stages, zipper frac's and the like.
If you have wells within 5-10 miles on at least 3 sides of you, I'd guess you could expect at least an 'average' well, probably 3MMCF/day. Probably little likelihood of having nothing, but the proof is in the drilling.
The Utica is an oil bearing sand and unlike the marcellus it may not be as
productive. There are places in Ohio that has the utica that is not comercially productive. This is geology.
I look for for utica production even in Pa to be largely located to certain
areas. As time goes on in PA the mapping while be more conclusive to how
the shale runs. Wish NY would let the drilling start. Go Marcellus Shale!
Geokinetics are now in Northern Butler County.
Saw the red flags with the markings on the road, the two grey boxes
with the antenna, and the long black wire which seems to run from
box to box, which are 250 feet apart. The flags appear to be 50 feet
apart.
Jim:
Corner of rts 58/308, Murrinsville, east to Anderson road (dirt road), to cementery road, then out to 38, and south. This is where the grey boxes were.
There is also the red flags running south towards Boyers from Murrinsville.
Waiting for some 'vibrations'.....
© 2024 Created by Keith Mauck (Site Publisher). Powered by
h2 | h2 | h2 |
---|---|---|
AboutWhat makes this site so great? Well, I think it's the fact that, quite frankly, we all have a lot at stake in this thing they call shale. But beyond that, this site is made up of individuals who have worked hard for that little yard we call home. Or, that farm on which blood, sweat and tears have fallen. [ Read More ] |
Links |
Copyright © 2017 GoMarcellusShale.com