Replies to This Discussion

Permalink Reply by bo boboski on March 2, 2013 at 9:57am

booger1  I'll check out the Kamm well ,later

Permalink Reply by Mike Fulper on March 2, 2013 at 10:32am

Thanks, i just cant do the ODNR...

Permalink Reply by Steven Gardner on March 2, 2013 at 2:20pm

Hi Mike,

The new DNR interactive site is a big improvement over the old site but you need a high speed internet connection. It is here.. http://www2.dnr.state.oh.us/website/dog/oilgasviewer/index.html

The property layers for Guernsey are a mess as nobody has taken the time to do it correctly but.. you get the picture. I've found I don't need to change much of anything to view wells. Just click ok on the disclaimer and then close the layers box and zoom into where you want. Turn on the basemap you want. Click on the "Info" tool at the top and click on a property or a well head for more "Info". Attached is the plat for the Clark well off Cubbison.

Hope that helps..

Attachments:

• EQT_CubbisonRd_231548.pdf, 2.1 MB

Permalink Reply by Mike Fulper on March 3, 2013 at 7:54am

HI Steve... thanks , i will check it out... but hope ole bo will post the Kamm site...:)

 

Mike

Permalink Reply by bo boboski on March 3, 2013 at 8:30am

Cant find a "Kamm " site. Is it listed with another name,or where is it?

Permalink Reply by Mike Fulper on March 3, 2013 at 12:29pm

It will be listed as Kamm wellsite...

.i think they havnt gottne the permit yet...

.is why it cant be found...

I have a EQT layout map of all 8 well sites....

Clark will have 3 going North west to 313...

Kamm and Dobeck EACH will have 3 going NW and 3 going SE

Most all pads will either be 3 lines run or SIX...!

EQT says they will move to Kamms site after Clark is done..

Eventually there will be 8 pad locations with up to

 

24 + lines run....by lines... i mean FRACTURED lines....

and Cubbison is due to be PAVED...oh woe is us...:)

 

 

Permalink Reply by Steven Gardner on March 3, 2013 at 12:05pm

Mike... The EQT Clark well bores under Kamm Rd but as others here have said, I don't see any other well permit in the area. The plat I attached shows the bore going all the way up to SR 313. I think they have filed for another lateral but I don't see a permit map yet...

Permalink Reply by Mike Fulper on March 3, 2013 at 12:23pm

Thats possible they havnt got the permit yet...

Thanks for looking tho...

I couldnt even find how to print out or find Clark...

 

but we do know they are going to Kamms/Kastelic site next

Well pad will be at the lower left of Kamms and Right lower of Charlie kastellic..

Somewhere is the blueprint tho for the Kamm Permit...

There will be six holes on Kamms.....well...3 on Kamm property and 3 on  Charlie Kastelic

Clark will have 3 holes....30 foot apart...

 

Kamm and Doebeck both will have 6 holes each...

Also a pad will go in at Tysingers property...

We have a EQT map of all 8 sites....side by side....

Outlined....not a blueprint...

Gonna be a long  noisy summer...

a 8 million gallon water hole is built on clarks and one will be built RIGHT ALONG SIDE Cubbison at Lyman Kastelics...

 

I wonder how long till BLUEGILLS ... appear in those ponds..:)

 

 

 

 

 

Permalink Reply by bo boboski on March 3, 2013 at 1:05pm

Is your map of EQT 's 8 well sites something you can share?

Permalink Reply by Steven Gardner on March 3, 2013 at 1:18pm

Mike... Sounds like you have more info than us.. :)

Permalink Reply by Mike Fulper on March 4, 2013 at 1:37am

I can try and run it thru my printer and put it on a pic file and email it...to anyone...

i would need a regular email...

Mine is .. offy@windstream.net

 

 

 

Permalink Reply by Mike Fulper on March 4, 2013 at 1:40am

I will make a pic file of it....hard to read the names on each site tho...

but gives a real accurate look of where the sites will be...

Anyone that wants a copy i need your REAL email...

Mine is.... offy@windstream.net

 

Mike

 

• ‹ Previous
• 1
• 2
• 3
• 4
• …
• 17
• Next ›
• Page