EQT in Guernsey Co.

EQT is busy tearing up Crane run Rd. off Rt. 146  hauling truck after truck after truck of water to their well off red lane rd. Dont know if they are fracking or getting ready to,or just drilling. Cant see the wellpad from any rd. They are also setting up on Cubbison rd, not far west from Northstar rd.. That drill pad is very close to the rd. And not far from a couple houses. Both wells are on ODNR's website. Small acreage drilling units.  Anyone got more info?

Views: 27908

Replies to This Discussion

Permalink Reply by Tony Yurina on May 16, 2013 at 3:50pm

I noticed a directional drilling machine at Stewart Road and Claysville Road today, it appears there will be a contractor performing a road bore at this intersection.

Permalink Reply by Steven Gardner on May 17, 2013 at 1:26am

Tony, We are getting some new water line .. nothing to do with the pipeline..

 

Permalink Reply by Tony Yurina on May 17, 2013 at 4:11pm

Steven

Thanks for the clarification regarding the purpose of the directional drilling unit.

Tony 

Permalink Reply by Tony Yurina on June 10, 2013 at 1:13pm

EQT has progressed to Cubbison road with thier production line from the Spencer well pad.  Sources indicate the pipeline is being routed to the two pads East of Cubbison and then to Helena Road.

Permalink Reply by bo boboski on June 11, 2013 at 8:11am

EQT just got another permit for Spencer twp. NCD3  well.   Dont know the exact location yet.

Permalink Reply by Scott Lake on June 12, 2013 at 2:43am

That's a revision of the Kamm well permit.

Permalink Reply by Mike Fulper on June 23, 2013 at 3:07am

Clark well is being Fracked all this past week..

Permalink Reply by bo boboski on June 23, 2013 at 9:32am

Watch out for earthquakes,cows dying,babies born with 3 toes!  tee hee

Permalink Reply by paul wheelock on June 30, 2013 at 11:25am

How long does it usually take to frac a well, if there are multiple wells,do they do them one at a time or at the same time?

Has anyone heard any production reports on the Spencer 1h ,the ODNR says that the Oil Co does not have to report untill next March, as the well just went into production this March,

I have a heck of a time trying to figure the ODNR site out  I appreciate any info,

                                                                                      Paul Wheelock ,Pahrump Nevada

Permalink Reply by paul wheelock on July 8, 2013 at 1:47pm

Hello Mike Fulper, can you check and see if the drill rig has been moved to the Kamm site ,or if it is still on the Clark pad, I am just curious ,

Permalink Reply by Mike Fulper on July 9, 2013 at 1:47am

Work on Kamm pad and 8 million gallon pond will start within 72 hours...:)

Permalink Reply by paul wheelock on July 9, 2013 at 1:57pm

has the drill rig been moved ,or is it still on the Clark site ?

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service