EQT is busy tearing up Crane run Rd. off Rt. 146  hauling truck after truck after truck of water to their well off red lane rd. Dont know if they are fracking or getting ready to,or just drilling. Cant see the wellpad from any rd. They are also setting up on Cubbison rd, not far west from Northstar rd.. That drill pad is very close to the rd. And not far from a couple houses. Both wells are on ODNR's website. Small acreage drilling units.  Anyone got more info?

Views: 27891

Replies to This Discussion

I was by this site saturday.  They are set up and drilling now.

thank you sir for the info , this summer when the wife and I are back in your country, it might be

cool if we all can all get together for dinner and a brew     Paul W

Here is a scan of the EQT sites...

Far left side is SPENCER, then Birchfield , then ?, then Dobeck, Kamm, Clark..and Tysinger at Right

Not sure where the 8th site is....

it looks to me as they will have ONE LARGE AREA fully covered....

Clark will be 3 wells butting up against Kamm.. and Kamm will butt up against Dobeck.. etc..

Attachments:

Amazing.. i finally figured how to post  !

The little yellow dots....are where the FRACKING will start..

the actuall well drilling pad will be off to one side or the other...of the yellow dot you see..

Each welll hole will be 1500 feet from where Fracking will start...!! long swinging curve...

The CLARK. PDF..  shows that...

THE LONG BLACK LINE... IS ... CUBBISON RD....

 

i have the word" LONNIE " pointing at it...

SR 313 IS MARKED AT THE TOP ALSO....

 

Mike

That's quite a plan .. now I know why they are working so hard on this pipeline RW and are planning a 40 ac compressor station across from me on Stewart Rd. The proposed pipeline heads north from all these wells thru Westland Twp towards the existing Tenn Gas pipeline.

Do you have a printout or paper info on this pipeline north out of our area to this 40 AC COMPRESSOR layout..?

I heard they were going West to Summerfield.. long way to pipe stuff..

Gas has to be cleaned and or separated before it would go into the Tenn Gas line

as gas is a "mixture" outa the well...

First i heard of a line going north and or the Stewart Rd compressor station..

 

We were told it will take 6 years to finish all this drilling....

again.. Clark is ONE PAD... but 3 wells......

 

 

How concrete are the plans in the drawing that you scanned?  I have a property in the Dobeck site as it is drawn.  Is there any more info?  How do you know this?  Is it likely that my property will be in a drilling unit?  Thanks for all of your info.

Anyone can just go to EQT and they will tell you anything you want to know.

they have no secrets...

All i can tell you is.. what they say.. and do.....

This map has 6 of the 8 sites... wityh TYSINGER to the right of Clark

You will have to do your own study with County Plat map....the outline is  real close...

Not a blueprint.. as each pad is applied for a blueprint will be come avaiable and then you will know where you stand...

dobeck pad will go both NW AND SE...6 wells will be drilled on Doebeck..

Not sure where the #8 site is... im guessing East of Tysinger...

EQT is spending 40 million on 8 sites along these lines...

EQT has spent a half million dollors on Cubbison rd improvments to the road alone...!!

Good luck...Mike

Thanks Mike!

I have land in Spencer Twp. west of Cubbison Road and North of Cowgill. Cowgill Lane used to end at about where my property begins. The old map I have says "no longer a public road." I'm wondering if anyone knows what's going on in that area. I live in Colorado. When I called EQT, they simply said they'd send a letter when they start drilling my land. I was hoping for a time estimate.

Have a great day!

Toni

Where is Stewart road and could you provide some landmark to identify the proposed compressor station lot? 

Tony,,  Stewart rd is in Westland Twp and according to EQT's map the compressor station would be in the southwest corner of Section 1

Have you heard if the proposed EQT Compressor station facility also includes any gas processing equipment? 

Locals, What is the EQT Clark well status? Does anyone know where or what pad the rig will move to next ?  

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service