Purchased well maps off a website...question?

So I have a lot of activity in my area {Pulaski Pa} and to see if I might possibly be in a well unit I purchased well plat maps off a website.  (not sure if I am allowed to mention site name?}  Anyway, I look at the map and its a little confusing.  It clearly shows direction of well legs, marked top hole and bottom hole, two of the legs run across our property, the others are pretty close...my question is the rectangle that is highlighted around the acreage.  Is that the unit?  Because if it is, then we are in every unit, even if the leg doesn't run across our property?  Right or wrong?  Thanks for the help.

Views: 4168

▶ Reply to This

Replies to This Discussion

Permalink Reply by Brian on July 25, 2014 at 6:23am

You can contact DEP in Meadville, ask for oil and gas. If you tell them the operator and pad name they will usually fax the permit and plat maps to you for free. It might take a few days for them to get it to you.

Permalink Reply by JoKlause on July 25, 2014 at 6:30am

Wow, geeze I wish I would have posted my question before I paid for the maps.  Thanks again everyone.  Great info!

Permalink Reply by cj wyalusing on July 28, 2014 at 2:58pm

  The well plats  are free  in pa  just no your well number and your county number and operator of well.also the  well your looking for 1h 2 h 6h ect.

And contact dep oil and gas for your part of the state.

Permalink Reply by crazyfarmer on July 28, 2014 at 4:29pm
can someone explain what's the top hole and the bottom hole? top hole is the pad and bottom is where the leg is stoped
Permalink Reply by crazyfarmer on July 28, 2014 at 4:30pm
Stopped*
Permalink Reply by JoKlause on July 29, 2014 at 12:49am

Yes crazyfarmer, the top hole is the well pad, the bottom hole is where the well leg ends.

Permalink Reply by crazyfarmer on July 29, 2014 at 2:18am
if your unit has acres in the well Pad but the leg is going the other way do you still receivable royalty? ?
Permalink Reply by JoKlause on July 29, 2014 at 7:01am

 Since I was able to get free maps emailed to me I requested plat maps for two other well sites that are close to my house (within 2 miles) the one map which is Whiting South, has 8 legs in a rectangle boundary, it says 1277.4 acres is in the tract boundary.  Is the 1277.4 acres the size of the unit?  And the unit has 8 wells on it? 

Permalink Reply by Oliver Perry on July 29, 2014 at 1:54pm

Jody,

I sent you a PM answering your question. Also, I attached here the DEP spud report showing all the Hilcorp wells, their location,  and the date they started drilling those wells in the township of Pulaski.

Attachments:
Permalink Reply by crazyfarmer on July 30, 2014 at 9:54am
?

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service