Replies to This Discussion

Permalink Reply by harleyowner2003 on November 13, 2014 at 5:45am

ODNR website.  Then go to well locator.  zoom in to see the horizontal wells for you county.  Sometimes there is a delay in posting the well on the locator after the permit is posted.  Once you see the well click on identify window on bar at top.  A box will come up and you need to select well search in the box.  Then click the blue rectangle.  Move pointer over and click on the well head.  Hopefully a box will open.  Then go down to bottom of box and click well summary report link.  This will open the permit and at the bottom you will see pdf attachments.  One or so will be the plat maps. Good luck.  Message me if you have trouble.

Permalink Reply by Scott Bailey on November 13, 2014 at 8:10am

Thanks, I knew someone on here could help me.

Permalink Reply by Philip Brutz on November 13, 2014 at 7:02am

What is the name of the well?

Permalink Reply by Scott Bailey on November 13, 2014 at 8:11am

Clark, it was just permitted 10/30/14.

Permalink Reply by Philip Brutz on November 13, 2014 at 8:17am

http://apps.ohiodnr.gov/mineral/oil/MRMImages/17/7/318404.pdf

Permalink Reply by Sonya Frederick on November 13, 2014 at 1:26pm

I have been looking for the same information as Scott on the Mohawk Warrior well that Rice is drilling.  They have entered lateral lines on the map, but the pdf's in the Well Summary Report Link are from back in the spring when they initially started drilling.  Any thoughts?

Permalink Reply by Philip Brutz on November 14, 2014 at 12:15am

Try calling the ODNR.