Replies to This Discussion

Permalink Reply by Jack Straw on March 17, 2012 at 6:14pm

Not sure which State you are located in.

Not sure whether you are referring to a Marcellus well or a Utica well.

I believe the following to be correct:

In PA a well bore can be no closer than 330 feet to a property/unit boundary.

In Ohio a well bore can be no closer than 500 feet to a property/unit boundary.

Not sure about exact limit for WV.

Now those are the legal limits.

In reality, (my understanding is that) for Marcellus wells the horizontal well bores are directed in an azimuth such that the well bore will intersect the J2 jointing within the shale.

Fracing tends to stay vertical (within the Marcellus shale) and radiate out preferentially perpendicular to the well bore horizontally (within the Marcellus shale) along the J2 jointing.

In any case, at 1300' "in front of" the terminus of the well bore, the closest that the fracing likely got to your property was 1300'.

Hopefully, you too will soon get your own well(s); until then, you can sleep well - no one has "robbed" anything from underneath you.

All IMHO,

JS

• ▶ Reply

Permalink Reply by Clinton44 on March 18, 2012 at 3:04am

You can figure out how close the bottom hole location of the horizontal bore is to your property line if you have the well plat. Use the latitude and longitude found on the plat in Google Earth which you can down load for free, use the ruler in their tool bar to figure out how far from your property line the well bore in question ended.

We had a situation similar to yours and by checking things out and asking questions we found that we had 14 acres pooled into the drilling unit of two well bores that fell very close to our property line.

  

• ▶ Reply