Maps of horizontal Drilling

Hi group. New here and frustrated. Where can you find info on where CHK drilling ends up when they bore horizontal?

Views: 2110

▶ Reply to This

Replies to This Discussion

Permalink Reply by Oliver Perry on June 10, 2013 at 4:17am
Permalink Reply by David Perotto on June 10, 2013 at 5:50am
Permalink Reply by Christa M on June 11, 2013 at 4:12am

I just checked the pa link.....the permit number that I have is not coming up.  They already drilled the well, fracked it and let it burn off as well.  When in the process are the wells listed on that website??

Permalink Reply by Oliver Perry on June 11, 2013 at 4:40am

Christa,

What info are you trying to find, production reports? If so, they only come out every six months.

Permalink Reply by Christa M on June 11, 2013 at 4:45am

I really wasn't looking for anything in particular....just put in the permit numbers that we have and nothing came up.  Is that sight for production information only??

Permalink Reply by Oliver Perry on June 11, 2013 at 4:55am

Yes, that's mostly what that site is for. You should be able to find your permit at both of the following links: I can help if you need assistance.

http://www.portal.state.pa.us/portal/server.pt/community/oil_and_ga...

http://www.ahs.dep.pa.gov/eFACTSWeb/

Permalink Reply by Christa M on June 11, 2013 at 5:00am

Thanks...I have the paper copies of both permits but was just seeing if there was any other drilling info out there (ex. where at in the process they are and if they drilled both laterals). 

Permalink Reply by Oliver Perry on June 11, 2013 at 5:02am

Spud report will tell you if both laterals were drilled. It's in the first link.

Permalink Reply by Christa M on June 11, 2013 at 5:35am

Yes....saw that also...only one of the laterals were drilled.

Permalink Reply by dmac on June 10, 2013 at 2:33pm
Yes and thanks for the info

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service