Activity in Millwood Township (Guernsey)

Information about drilling activity, pipelines, etc. in Millwood Township.

Views: 122365

Replies to This Discussion

Permalink Reply by evan on December 28, 2013 at 1:45pm

Philip, CHK came to the Mcclain unit drilled one lateral. Then they left ..  they were only there about two weeks..

Permalink Reply by Philip Brutz on November 29, 2013 at 12:21pm
Permalink Reply by Philip Brutz on November 29, 2013 at 12:31pm
Permalink Reply by Philip Brutz on November 29, 2013 at 12:36pm
Permalink Reply by Philip Brutz on December 6, 2013 at 3:11pm

Rex Energy Provides Operational Update

STATE COLLEGE, Pa., Dec. 6, 2013 (GLOBE NEWSWIRE) -- Rex Energy Corporation (Nasdaq:REXX) today provided an update on its operations.

Appalachian Basin -- Warrior South Prospect

The five-well J. Anderson pad, located in Guernsey County, Ohio, was placed into sales from its resting period at an average five-day sales rate per well (excluding downtime) of 1,886 Boe/d (40% NGLs, 40% gas, 20% condensate) assuming full ethane recovery and an average natural gas shrink of 12%. The five wells produced with an average casing pressure of 3,293 psi during the five-day sales period on an average 18/64 inch choke. The five-well pad was drilled to an average total measured depth of approximately 12,873 feet with an average lateral length of approximately 4,250 feet and was completed in an average of 28 stages, utilizing the company's 150' "Super Frac" design. Based on composition analysis, the gas being produced averaged 1,257 BTU.

Five-Well J. Anderson Well Results -- 5-Day Sales
Rates
------------------------------------------------------------------------------
Total Percentage Total
(Full of Liquids (Ethane
Natural Ethane (Full Rejection
Gas Condensate NGLs Recovery) Ethane Mode)
(Mcf/d) (Bbls/d) (Bbls/d) (Boe/d) Recovery) (Boe/d)
---------- -------- ---------- --------- ---------- ---------- ---------
J.
Anderson
1H 4,454 347 740 1,830 59% 1,426
---------- -------- ---------- --------- ---------- ---------- ---------
J.
Anderson
2H 4,597 434 770 1,971 61% 1,520
---------- -------- ---------- --------- ---------- ---------- ---------
J.
Anderson
3H 4,427 358 760 1,856 60% 1,438
---------- -------- ---------- --------- ---------- ---------- ---------
J.
Anderson
4H 4,414 368 750 1,853 60% 1,437
---------- -------- ---------- --------- ---------- ---------- ---------
J.
Anderson
5H 4,471 385 792 1,922 61% 1,489
---------- -------- ---------- --------- ---------- ---------- ---------
Average 4,473 378 762 1,886 60% 1,462
---------- -------- ---------- --------- ---------- ---------- ---------
Tom Stabley, Rex Energy's Chief Executive Officer commented, "The strong pressure profiles and early production results of our five-well J. Anderson pad are very encouraging, especially given the limited choke size we are utilizing to produce the wells. We are also pleased that these wells, along with our first three Warrior South Prospect wells, are currently producing into sales without any midstream constraints. We feel the production results of the five J. Anderson wells further demonstrate the value of our acreage position in the Warrior South Prospect."

http://online.wsj.com/article/PR-CO-20131206-905171.html

Permalink Reply by evan on December 6, 2013 at 3:15pm

What do you think Philip.  That's your backyard..

Permalink Reply by Philip Brutz on December 6, 2013 at 3:19pm

This is one of the reasons that I won't sell my mineral rights.

Permalink Reply by scott peterson on December 10, 2013 at 8:22pm

Great info Phil....thanks you for the research....

Permalink Reply by scott peterson on January 11, 2014 at 2:50pm

Any new scuttle going around?

Permalink Reply by Philip Brutz on January 11, 2014 at 4:12pm

I live in Cleveland so I don't hear much.

Permalink Reply by Philip Brutz on February 20, 2014 at 8:12pm
Permalink Reply by scott peterson on February 21, 2014 at 7:42am

Very impressive....are the blue dots the potential future drilling sites?

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service