Troyer Well?

Still no updates on the Troyer/TUSC 3 well in Tusc?  

Views: 12649

Replies to This Discussion

Permalink Reply by Paul Martinelli on March 27, 2012 at 1:26am

nope!

Permalink Reply by TM on March 27, 2012 at 2:14pm

will they put out any production numbers on this well at the end of this month or not? I heard wells have to put these reports out for yearly tax purposes.

Permalink Reply by JR on March 27, 2012 at 2:26pm
I'm not under the impression it's producing...only a brief flare is what I've heard. Everything I've heard is rumor, so I wish they'd provide some kind of update.
Permalink Reply by shawn miller on April 3, 2012 at 1:43pm

A pump jack was brought in and is up and running.  pump jack is much bigger than normal ones. looks like its 10-12 ft high at the pivot        running at about 8 cycles per minute 

Permalink Reply by TM on April 3, 2012 at 1:50pm

So why did they put in a pump jack? Is there heavy crude oil in the well or what? I noticed most other wells in other counties do not have pump jacks installed.

Permalink Reply by JR on April 3, 2012 at 1:55pm

I was told they had a "swabber" in there recently.  I am not familiar with these terms.  Can someone please elaborate?  Would heavy crude be a good thing?  I was also told "the results weren't exactly what they expected," which you know that could be translated to mean anything.  They've been awfully quiet about this one!

Permalink Reply by TM on April 3, 2012 at 1:59pm

maybe they put in the pump jack because of low pressure in the well. The pump jack was probably the only way they could get the gas and oil to the surface to get production going. Who knows really. There has been very little info come about this well for sure.

Permalink Reply by shawn miller on April 3, 2012 at 2:20pm

not sure why they put pump in. i've  heard that on conventional clinton/rose run wells is pump jack=lots of oil

Permalink Reply by JR on April 4, 2012 at 7:37am

I wonder if this machine is the same as a pump jack.  If so this would support the oil theory.

http://www.rigzone.com/training/insight.asp?insight_id=315&c_id=4

Permalink Reply by TM on April 4, 2012 at 8:09am

Yes that is a pump jack. I imagine they are using a beam pump at this site the way it sounds. I am thinking it might have thick crude oil which is blocking the gas from coming out as well. The biggest reason they probably put in the pump jack was because of low pressure inside the well. They could not get the oil and gas to flow into the wellbore like they wanted too without the use of a pump jack. The swabber they brought in is probably the people that installed the reservoir pump and sucker rods to be used with the pump jack.

Permalink Reply by JR on April 4, 2012 at 9:56am

TM, forgive my lack of knowledge on this stuff but does this point to good or bad results with this well?  Can you even speculate?

Permalink Reply by TM on April 4, 2012 at 10:42am

Hard to really say JR. If there was no liquids or gas they surely would not have installed the pump jack. Without knowing how many barrels of oil or gas figures it is very hard to tell what the results will be. I know they would not have installed a pump jack on a dry hole that is for sure.

RSS

© 2025   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service