Replies to This Discussion

Permalink Reply by Brian on June 14, 2012 at 1:14am

I wonder if that is the top hole rig? I didnt think that all the permits for that site had gone thru yet?

Permalink Reply by matthew h mcsparren on June 15, 2012 at 12:23am

Looks like Chevron got two permits aproved yesterday for the Frills cornor site. One vertical and one horizonal. Nickleville area next? Have not seen the rig, but heard it was small, with some large drill bites.

Permalink Reply by Kim Wills on June 15, 2012 at 2:07am

Where is Frills Corners?

Permalink Reply by Buddy on June 15, 2012 at 7:10am

What is the significance of the drill rig being small?  Is it significant about the size of the drill bits?

Is this a Marcellus Well? Utica Well?

Permalink Reply by Brian on June 15, 2012 at 6:38am

Drove by this morning to check it out.

Attachments:

• IMG_0378.JPG, 2.7 MB
• IMG_0380.JPG, 2.6 MB
• IMG_0381.JPG, 2.2 MB

Permalink Reply by Brian on June 28, 2012 at 4:38pm

Night shot

Attachments:

• photo(1).JPG, 1.4 MB

Permalink Reply by matthew h mcsparren on June 30, 2012 at 9:05am

Just stoped at the Frills Cornors site, All set up but no crew on site. Drilling rig Highland # 2

Permalink Reply by Buddy on July 15, 2012 at 3:10pm

Anything happening with the Frills Corners well?

Permalink Reply by Brian on July 22, 2012 at 7:12am

Stopped by the site last night to see how things were going.   Appeared like they may have just cemented a casing string in (cement head on top of casing) waiting on it to set up.  Does anyone around the area know what the plans are? Are they going to be switching rigs out at some point?

Permalink Reply by HD on July 22, 2012 at 4:18pm

I am not sure if this is true, but I heard that the rig they have in place now is only capable of drilling the vertical hole, and that they will need to bring another, bigger rig in when they are ready turn the bore.  I also heard that they were drilling 2 wells on the same pad, and about 15 feet apart.  I don't know how good a source the person I talked to was, and I don't have the technical knowledge to know if this even sounds plausible.

Permalink Reply by Jamie Shropshire on March 11, 2013 at 4:58am

I was out by Frills Corners yesterday. After months of no activity, it is very busy again. Does anyone know if they are getting ready to go horizontal?

Permalink Reply by RichR on April 4, 2013 at 4:25am

The big rig has arrived at Frills Corners and according to "The Clarion News" there are to be two horizontal wells drilled.  They are also in the planning and permitting stage for a gathering pipeline that will go south from these wells toward Elk Twp. to tie in with an existing pipeline.

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page