Action at Palmer and Shannon well sites

This AM i noticed a great deal of equipment moving around at the Shannon site on District Road. This is the site where Shell has permits to drill 6 wells. Also some new equipment moving into the Palmer well in Fairview Township. This is the site that had a small rig in there a couple of weeks ago and appeared to be drilling. The site sits back from the road far enough that it is hard to get a good look at what they are really doing there. Does anyone know if Chevron has started anything at their new site on Charleston Road in Jefferson Township?   Halcon has surveyed for a new pipeline from the Pilgrim well to the east side of route 19 along Laver Road about 1/2 mile to a small pumping station along a TGT pipeline. I am wondering if they are planning other wells in that area as it is quite a distance from the Pilgrim well to the pump station.

Views: 1788

Replies to This Discussion

Permalink Reply by JohnL on June 19, 2013 at 10:36am
No activity yet on Charleston Rd.
jl
Permalink Reply by JREwing on June 20, 2013 at 1:19am

Looks like Swepi is setting up the big rig on the Palmer pad, but like WTF said pad sits well far back off the road and behind a knoll, so it's hard to see exactly what's going on. 

Permalink Reply by Oliver Perry on June 22, 2013 at 12:16am

Nabors #M39 rig is being set up.

Permalink Reply by JREwing on June 25, 2013 at 5:51am

Apologies for the quality of this photo, but was taken with my iPhone and its digital zoom.  This shot is from the east side of the wellpad on Airport Road this morning.

Permalink Reply by JREwing on August 2, 2013 at 5:29am

The rig is being dismantled and moved from the Palmer well and is being transported north on Rt. 19.  To the Shannon pad now?  Anybody?

Permalink Reply by Elnathan Cory on August 2, 2013 at 5:56pm

What is the location of the Shannon well?

Permalink Reply by Bob Rock on August 3, 2013 at 12:39am

Shannon well is surrounded to north by hutcheson rd. south by district rd ,east by steckler rd and west by cannon rd.

Permalink Reply by Guy Shannon on August 3, 2013 at 2:33pm

Shannon pad is not completed yet. They just soil cemented it this past week. It should be done by the end of next week. 

Permalink Reply by Bob Rock on August 3, 2013 at 2:39pm

if you dont mind who is the dirt contractor guy?

Permalink Reply by Guy Shannon on August 3, 2013 at 4:12pm
JL Watts
Permalink Reply by Guy Shannon on August 20, 2013 at 1:57pm

Yesterday a small rig moved in on the Shannon site to set the 20 in. conductor pipe. They finished sometime today but the rig is still there. Don't know when they are going to start the vertical hole.

RSS

© 2025   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service