Meaning of "Plugged Back"

In Seneca Twp, Monroe Cty, Ohio I have a small interest in a well.  There are 5 laterals, 4 of these on the DNR map show "drilled" the 5th one shows "Plugged Back"  does anyone know the exact meaning of "Plugged Back"?

Views: 846

▶ Reply to This

Replies to This Discussion

Permalink Reply by Harry E. Rose on March 24, 2016 at 4:46am
One possibility is it was the first one drilled and they drilled to the sand to test it to see what was there. Then they liked what they seen, plugged back to make the u, so they could drill the lateral.
Permalink Reply by KAR on March 24, 2016 at 6:14am
What is the api # or name of the well?
Permalink Reply by Zoner on March 24, 2016 at 6:33am

Could be a lost hole. They may have plugged and sidetracked. If you know the well name I can look at the well and plug permits and let you know.

Permalink Reply by Rick S. on March 24, 2016 at 6:52am

Its Kurtz Unit 1H, believe the api # is 34111245340000.

Permalink Reply by Barry D on March 24, 2016 at 7:01am

Kurtz Unit 1H API # 3411124530000

Permalink Reply by Zoner on March 24, 2016 at 7:10am

it shows it as green witch means producing. Read the plug report, it states:

The company will deviate around the borehole and continue drilling
on the same original directional plan.

The plat shows the well is drilled also. I think it will be fine.

Attachments:
Permalink Reply by Rick S. on March 24, 2016 at 7:16am

Good Info, thanks Zoner

Permalink Reply by KAR on March 24, 2016 at 7:20am

Agree. It looks like they needed to stop drilling on the first path due to some reason. Plug back the open hole with cement and then redrill the lateral portion. If you look at the as-drilled survey you can see where the original wellbore was drilled and then the sidetrack with the new lateral. 

"On site inspection to witness the 8.75'' production borehole plug back due to hole conditions. The well bore was drilled to 9,929' at 91.67 ° Inclination and 332° Azimuth with a borehole defect encountered at 7,510' and the company not being able to get past that spot at 7,510'. Halliburton pumped a 205 sack 16.8# 1.02 yield plug was set through the drill string setting at 7,494' with 50 barrels of 13.2# Tuned spacer ran ahead. The company will deviate around the borehole and continue drilling on the same original directional plan."

Permalink Reply by Rick S. on March 24, 2016 at 7:38am

Zoner,  I have another well I want to check would you be so kind to post the link where you got the pdf form  "Plat.pdf, 2.8 MP"  Thanks

Permalink Reply by Zoner on March 24, 2016 at 8:02am
Permalink Reply by Rick S. on March 24, 2016 at 8:08am

I have that link, can't figure out from there how you get the map that names etc, I must be missing something?

Permalink Reply by Zoner on March 24, 2016 at 8:12am

click on the well, box appears, click on "well summary report link" documents listed at bottom of page. 

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service