After the well drilling has finished...

is there still a lot of noise that comes from the wellhead?

Do the wells remain lighted throughout the night?

Views: 2093

▶ Reply to This

Replies to This Discussion

Permalink Reply by Clinton44 on December 7, 2012 at 3:06am

Permalink Reply by Clinton44 on December 7, 2012 at 3:08am

Permalink Reply by JR on December 7, 2012 at 3:11am

What are we looking at here...4 wells?  storage tanks, pumps?  thanks

Permalink Reply by Clinton44 on December 7, 2012 at 3:17am

Hi JR,

Five well heads in first picture, sixth was not fraced until later it was fraced about two weeks ago..

Not sure what the yellow tanks are maybe condensate tanks, other equipment is the apparattus that moves the gas from the wells to the gathering line which is on the other side of the enbankment behind the tanks and other equip.

Permalink Reply by Clinton44 on December 7, 2012 at 3:11am

Hi Summer

Above are two pictures of the well heads and associated equipment on a pad after the rigs leave and wells are fraced and in production.

Not much noise, some light, maintenance people in and out to keep an eye on things,

Permalink Reply by Summer Johnston on December 7, 2012 at 6:18am

Thanks, Eric.

 

That doesn't look too bad if you're some distance away from the wellhead. All I could imagine was a site lit up like a football field during the nighttime.

 

Thanks again.

Permalink Reply by Jason on December 7, 2012 at 6:43am
Where is this site? Town and county? Thanks.
Permalink Reply by Clinton44 on December 7, 2012 at 6:54am
Clinton County Grugan Towhship about one mile north of the road that turns off to Hyner View
Permalink Reply by Brian Powers on December 7, 2012 at 10:43am

Summer - what I see here is a well pad with some wells ready to produce, some basic gas/liquid separation equipment, and some liquid storage tanks.

 

The solar panels suggest to me some flow monitoring devices  or some basic automated flow control capabilty, or a third possibilty to me is some cathodic protection to mitigate corrosion. I'd have to see more detailed photos or visit the well pad to tell for sure.

 

The wellhead is the piece that has a flange parallel to the ground elevation. The equipment that bolts onto this flange is the "Christmas Tree" that contains flow throttling or isolation valves. Noise in this equipment in my experience is related to flow from the well. Dry gas hisses or whines, whereas liquid slugs make more of a" Glug-Glug" sound.

 

Lighting on the location after the rig leaves is at the operator's discretion.

 

I hope this helps,

 

Brian

Permalink Reply by Summer Johnston on December 8, 2012 at 4:03am

Thanks for you input, Brian.

 

Someone had told me that even after well completion, there was quite a bit of noise that came from the wellhead and that it would remain well lit after the rig was removed. I couldn't imagine how people could sleep who have wells near their homes.

Permalink Reply by LW on December 8, 2012 at 8:12pm

 We have 2 wells near us, in opposite directions ( 200 ft approx).  Both dry natural gas.  One has a 100ft wooded buffer.  There has not been any  noise after completion from that one.  The other does not have a wooded buffer and is elevated a good deal above us. We hear the continuous  hissing. and sometimes banging.   It is not  loud, just a new noise that is not part of nature. 

  I asked a CHK representative if it was always going to make this noise and was told that I won't hear it once the royalties start. :)

RSS

© 2025   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service