What is the difference between the two? what are the boundaries of well bores/pipeline in order to collect royaties. It looks as if we are not located within the drilling unit on the Fowler well, but wondering what the chances are that we may be in the production unit. Does Ohio have the mandatory pooling law? If so, what exactly does that mean to me? I am about 1/2 mile S mostly but a little SE of the wellpad site. Is there a radius from the wellpad that is automatically included in the royalty collecting? I've got pretty bad luck so .....  Thanks!!

Views: 458

Replies to This Discussion

lateral spacing is generally parallel 1000 feet apart, sometines up to 1500 feet.  Most horizontalls will travel about 2400 to a mile in length.  They tend to run in a SSE and or NNW direction.  The royalty zone is more like a long rectangle as opposed to a radius like seen in vertical drilling.

I meant I am a little SW of drill pad...so how far from the outside horizontals is considered in the production unit? Do they branch off moreblike a fork or more like a triangular direction? dovyou know where they put the pipeline?

should be like a fork.  As for the pipeline, not sure.  Looks like you'll sit near the edge.  My understanding is the royalty zone will be 1000 feet from the laterals.  When I said NNW and SSE it is usually by 10 degrees off due North and South.  Good luck!  I hope all your acreage makes it in.  Do you know how many laterals the well pad will include?

I was told by a geologist at the ODNR that they are putting in 6 per well in. Columbiana county. Thanks

looks like it will be close .  the gas collection zone should be about 4000 feet wide, and then however long the laterals are

Thanks for your insight!

RSS

© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service